SELF BASE THERMOADHESIVE MEMBRANE
Thermoadhesive elastomeric polymer
distilled bitumen membrane (SBS)
Self-heating adhesive waterproofing
membrane produced using a specific compound that has a substantial
intrinsic thermal susceptibility in all the bituminous mass, which
excludes the need of resorting to surface treatments or technologies
based on hot coated bonding materials (hot melts). The SELF BASE line
consists of:
- SELF BASE POL 3, thermoadhesive waterproofing membrane based on bitumen and special elastomeric polymers (SBS); reinforcement with non-woven polyester fabric; lower surface coated with silicone film. SELF BASE POL is indicated for use as a bottom layer or foundation and in multi-layer systems in accordance with EN 13707 and EN 13969.
- SELF BASE VV3, thermoadhesive waterproofing membrane based on bitumen and special elastomeric SBS) polymers; fibreglass mesh reinforcement; lower surface coated with silicone film. SELF BASE VV3 is indicated for use as a first layer in multi-layer systems, in which one of the two layers is reinforced with polyester non-woven fabric, in accordance with EN 13707.
Advantages:
- It can also be used where the direct use of an open flame on the surface to be waterproofed is not recommended or damaging.
- Easy and clean laying operations.
- Quick and easy laying because only one layer is applied by blowtorch, the upper one.
- It can be used on a wide range of surfaces, in particular on thermoplastic insulating material that is sensitive to open flame and wooden roofs.
![SELF BASE Thermoadhesive membrane, Thermoadhesive elastomeric polymer
distilled bitumen membrane (SBS)](/selfbase.jpg)